请教各位大佬,为啥我的nvme只有800MB/s

查看 26|回复 1
作者:t9913085   
[email protected]:~# wget -qO- bench.sh | bash
-------------------- A Bench.sh Script By Teddysun -------------------
Version            : v2023-06-10
Usage              : wget -qO- bench.sh | bash
----------------------------------------------------------------------
CPU Model          : Intel(R) Core(TM) i3-6100E CPU @ 2.70GHz
CPU Cores          : 4 @ 2700.000 MHz
CPU Cache          : 3072 KB
AES-NI             : Enabled
VM-x/AMD-V         : Enabled
Total Disk         : 469.6 GB (144.3 GB Used)
Total Mem          : 15.5 GB (331.6 MB Used)
Total Swap         : 7.8 GB (0 Used)
System uptime      : 0 days, 0 hour 5 min
Load average       : 0.00, 0.00, 0.00
OS                 : Debian GNU/Linux 11
Arch               : x86_64 (64 Bit)
Kernel             : 5.15.94-x86
TCP CC             : bbr
Virtualization     : Dedicated
IPv4/IPv6          : Online / Offline
----------------------------------------------------------------------
I/O Speed(1st run) : 842 MB/s
I/O Speed(2nd run) : 891 MB/s
I/O Speed(3rd run) : 891 MB/s
I/O Speed(average) : 874.7 MB/s
[email protected]:~# dd if=/dev/nvme0n1 of=iotest bs=1024k count=1k conv=fdatasync && rm -fr iotest
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 1.35193 s, 794 MB/s
[email protected]:~# dd if=/dev/nvme0n1 of=iotest bs=1024k count=1k conv=fdatasync && rm -fr iotest
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 1.31612 s, 816 MB/s
[email protected]:~# dd if=/dev/nvme0n1 of=iotest bs=1024k count=1k conv=fdatasync && rm -fr iotest
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 1.26733 s, 847 MB/s
[email protected]:~# dd if=/dev/nvme0n1 of=iotest bs=1024k count=1k conv=fdatasync && rm -fr iotest
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 1.33218 s, 806 MB/s

大佬, 为啥, VM

mbsi   
这是缓外速度
您需要登录后才可以回帖 登录 | 立即注册

返回顶部